Engineering Subjects Courses in Doha

Finding home tutors in Doha and in other cities in Qatar is now easy with MyPrivateTutor. We also help you find tuition classes and coaching centers in Doha as well as online tutors. Home tuition helps to get higher marks and increase confidence. Use our portal to find the best local tutors, tutorial centers and tuition classes in Doha.


Home» Course in doha » Engineering Subjects Courses in Doha
Show Per pages
Result :1 to 12 of 12
Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days(Either Sat-Mon-Wed OR Sun-Tue-Thu) from 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Mechanical

Course Details

Introducing MME/MMUP/UPDA Mechanical Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Handouts and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Introduction and Discussion on How To Apply To UPDA
  • Duct Design
  • Duct Layout sizing & Example
  • Chilled Water Pipe Design
  • Chilled Water Pipe Design Example
  • Thermodynamic Part 1 >> 1-25 Questions
  • Thermodynamic Part 2 >> 26-50 Questions
  • Heat Load Calculation Procedure
  • Compressor
  • Reciprocating Compressor
  • District Cooling
  • Heat Transfer - Refrigeration and Air Conditioning
  • Heat Transfer 1-25 Questions
  • Heat Transfer 26-50 Questions
  • Compressors, Gas Turbines &  Jet Engines 1-25 Questions & discussions
  • Compressors, Gas Turbines_ Jet Engines 26-50 Questions & Discussions
  • Project Management Fundamentals
  • Fire Fighting -  Questions & Discussions
  • Mechanical - Questions & Discussions
  • Full length simulation exam for 2 Hours

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days(Either Sat-Mon-Wed OR Sun-Tue-Thu) from 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Chemical

Course Details

Introducing MME/MMUP/UPDA Chemical Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Handouts and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Process variables: Pressure, Temperature, Concentrations, Mass & Volume "Density", viscosity....etc.
  • Hydrocarbon chain and Chemistry
  • Thermodynamics
  • Process flow diagram and Process and Instrumentation Diagram
  • Design concept
  • Process equipment: Static and Rotating.
  • Hydrocarbon accounting
  • Environmental engineering: Air, Water, Oil and Industrial Waste.
  • Process Software
  • Supply chain management
  • Safety
  • Risk assessment, HAZID and HAZOP
  • Permit to Work.
  • Project Management fundamentals
  • Other related topics for exam
  • Simulation questions on each topic
  • Full simulation exam and Assessment

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD1800
  • Duration: 24 Hour
  • Time / Schedule: Alternate Days(Either Sat-Mon-Wed OR Sun-Tue-Thu) from 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Civil

Course Details

Introducing MME/MMUP/UPDA Architect Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Handouts and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Brief over view of submission procedure and exam Pattern
  • History of Arab Architecture
  • Key projects in Qatar and their design Architects
  • Fundamental of Architecture covering Materials, properties of materials, functions, textures, color themes, Lighting and color index
  • Building codes / By Laws - Parking requirements etc.,
  • Interior Design concepts
  • Basics of MEP
  • Project Management fundamentals
  • Other related topics for exam
  • Simulation questions on each topic Full simulation exam and Assessment 

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days(Either Sat-Mon-Wed OR Sun-Tue-Thu) from 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Electrical

Course Details

Introducing MME/MMUP/UPDA Electrical Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Handouts and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Introduction and Discussion on How to Apply UPDA
  • Electrical Engineering
  • Electronics Engineering
  • Project Management Fundamentals
  • Full length simulation exam for 2 Hours

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days(Either Sat-Mon-Wed OR Sun-Tue-Thu) from 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Civil

Course Details

Introducing MME/MMUP/UPDA Civil Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Handouts and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Fundamentals Of  Civil Engineering
  • Structural Analysis
  • Soil Mechanics and Foundation
  • Surveying
  • Planning and Scheduling
  • Project Management fundamentals
  • Roads & Traffic Engineering
  • Fluid Mechanics and Hydraulics
  • Contract Administration
  • Sustainability Materials
  • Each Session Special Practice of UPDA Civil Questions & Answers
  • Full length simulation exam for 2 Hours 

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days In a week(Sat-Mon-Wed OR Sun-Tue-Thu) 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Chemical

Course Details

Introducing MME/MMUP/UPDA Chemical Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Hand outs and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Process variables: Pressure, Temperature, Concentrations, Mass & Volume "Density", viscosity....etc.
  • Hydrocarbon chain and Chemistry
  • Thermodynamics
  • Process flow diagram and Process and Instrumentation Diagram
  • Design concept
  • Process equipment: Static and Rotating.
  • Hydrocarbon accounting
  • Environmental engineering: Air, Water, Oil and Industrial Waste.
  • Process Software
  • Supply chain management
  • Safety
  • Risk assessment, HAZID and HAZOP
  • Permit to Work.
  • Project Management fundamentals
  • Other related topics for exam
  • Simulation questions on each topic
  • Full simulation exam and Assessment

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days In a week(Sat-Mon-Wed OR Sun-Tue-Thu) 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Mechanical

Course Details

Introducing MME/MMUP/UPDA Mechanical Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Hand outs and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Introduction and Discussion on How To Apply To UPDA
  • Duct Design
  • Duct Layout sizing & Example
  • Chilled Water Pipe Design
  • Chilled Water Pipe Design Example
  • Thermodynamic Part 1 >> 1-25 Questions
  • Thermodynamic Part 2 >> 26-50 Questions
  • Heat Load Calculation Procedure
  • Compressor
  • Reciprocating Compressor
  • District Cooling
  • Heat Transfer - Refrigeration and Air Conditioning
  • Heat Transfer 1-25 Questions
  • Heat Transfer 26-50 Questions
  • Compressors, Gas Turbines &  Jet Engines 1-25 Questions & discussions
  • Compressors, Gas Turbines_ Jet Engines 26-50 Questions & Discussions
  • Project Management Fundamentals
  • Fire Fighting -  Questions & Discussions
  • Mechanical - Questions & Discussions
  • Full length simulation exam for 2 Hours

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Al muntazah
  • Course Fees: USD2000
  • Duration: 30 Hour
  • Time / Schedule: Alternate Days In a week(Sat-Mon-Wed OR Sun-Tue-Thu) 7.00 P.M to 10.00 P.M
  • Engineering Subjects » Civil

Course Details

Introducing MME/MMUP/UPDA Civil Engineer Registration Exam preparation Training Program

  • We have experienced trainers with thorough knowledge of the procedures of obtaining license and will guide you for success.
  • We provide following services as part of training program

1. Equip you with complete knowledge of the requirements for obtaining License.

2. Refreshing you with engineering principles of mechanical systems and simulation exercises which will be very similar to the examination questions.

3. Hand outs and exercises for preparation.

4. Guidance on the submission process.

5. Guidance and support by our trainers to clear the examination successfully.

This training will prove a golden opportunity to work towards obtaining your license from MMUP, Qatar, which will have high impact in your career.

Course Major Topics Include

  • Fundamentals Of  Civil Engineering
  • Structural Analysis
  • Soil Mechanics and Foundation
  • Surveying
  • Planning and Scheduling
  • Project Management fundamentals
  • Roads & Traffic Engineering
  • Fluid Mechanics and Hydraulics
  • Contract Administration
  • Sustainability Materials
  • Each Session Special Practice of UPDA Civil Questions & Answers
  • Full length simulation exam for 2 Hours 

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Doha
  • Course Fees: Ask Now
  • Duration: Ask Now
  • Time / Schedule: Ask Now
  • Engineering Subjects » Electronics

Course Details

  • Robotics
  • Lego
  • Electronics
  • Arduino Programming 
  • Logic Development

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Doha
  • Course Fees: Ask Now
  • Duration: Ask Now
  • Time / Schedule: Ask Now
  • Engineering Subjects » Computer / IT

Course Details

English learning for Engineering candidates is conducted here. We have designed classes of compact, professional format for the best learning of the candidates. Comprehensive coaching is given by us to each of the students attending the course. Optimum amount of practicals are provided to the candidates. Each and every student is provided with intensive guidance and care.

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Doha
  • Course Fees: Ask Now
  • Duration: Ask Now
  • Time / Schedule: Ask Now
  • Engineering Subjects » Computer / IT

Course Details

Revit Architecture Learning Course is available here for the students. Revit software works the way architects and designers think, so you can develop higher-quality, more accurate architectural designs. View features to see how you can use architecture design tools built to support Building Information Modeling (BIM) workflows.

Contents:

  • Introduction to Revit Architecture
  • Identifying User Interface Components
  • Opening a Project File
  • Template Overview
  • Understanding the Project Browser
  • Understanding the Properties Palette
  • Understanding BIM
  • Difference between BIM and CAD
  • Phases
  • Levels
  • Column Grids
  • Walls
  • Creating Architectural and Structural Columns
  • Doors and Windows
  • Elevations
  • Sections
  • Elevations
  • Sections
  • 3D Views
  • Camera View
  • Floors
  • Roofs
  • Ceilings
  • Stairs
  • Topography
  • Rooms
  • Renderings
  • Detailing
  • Printing and exporting

Get More Info


Classroom
  • Not Rated yet
  • Be First to Review

  • Location: Doha
  • Course Fees: Ask Now
  • Duration: Ask Now
  • Time / Schedule: Ask Now
  • Engineering Subjects » Civil

Course Details

AutoCAD Civil3D Training Program is one of the most popular program of ours. AutoCAD Civil 3D engineering software provides civil engineering professionals with targeted solutions for a wide variety of infrastructure projects, including land development, transportation, and water projects. The ourse contents are as follows:

  • AutoCAD Civil 3D User Interface
  • Preliminary Layout
  • Creating a Survey Plan
  • Building a Survey Quality Surface
  • Working with Alignments
  • Working with Profiles
  • Corridor Modeling
  • Pipes
  • Grading
  • Data Shortcuts

Get More Info


X

To provide you with the best experience, cookies are used on this site.
Find out more here.

Top